Tools
Black / White Mallet for T-Molding
Black and white mallet in semi-hard rubber.
It's the perfect companion to install any type of T-Molding.
Do not leave a mark.
Ceramic soldering iron 30w / 230v
Soldering powerful 30W ceramic for general purposes and lead-free soldering.
Four Way Crimping Tool
Manufactured from carbon steel, hardened, tempered and chemically blacked.
Four Way Crimping Tool - multistandard
Manufactured from carbon steel, hardened, tempered and chemically blacked. The ergonomic moulded handles provide a comfortable grip, ideal for repetitive tasks.
Hollow Torx Bits T20
Screwdriver bit type Torx T20 hollow titanium.
This tip is suitable for small screws have original on Sega Naomi Arcade. Terminals
Hollow Torx Bits T30
Screwdriver bit type Torx T30 hollow titanium.
This tip is suitable for large screws have original cabinet Arcade SEGA Naomi.
Meche wood 24mm flat
This wood wick allows for 24mm diameter holes in any type of wood (soft or solid).
The holes are made clean.
Thanks to it you can create a panel for your needs.
Meche wood 28mm flat
This wood wick allows for 28mm diameter holes in any type of wood (soft or solid).
The holes are made clean.
Thanks to it you can create a panel for your needs.
Meche wood 30mm flat
This wood wick allows for 30mm diameter holes in any type of wood (soft or solid).
The holes are made clean.
Thanks to it you can create a panel for your needs.
Sheet metal punch 24mm
This punch allows for 24mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made clean and does not bend the metal.
Thanks to it you can add buttons that you lack.
Sheet metal punch 28mm
This punch allows for 28.3mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made clean and does not bend the metal.
Thanks to it you can add buttons that you lack.
Sheet metal punch 30mm
This punch allows for 30mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made clean and does not bend the metal.
Thanks to it you can add buttons that you lack.
Slotting Cutter 1,6mm
This 1.6mm grooving disc will allow you to make a 1.6mm wide groove.
Can be used mainly with 19mm T-Molding.
Check the compatibility of the groove of each T-Molding you use.
Slotting Cutter 2mm
This 2mm grooving disc will allow you to make a 2mm wide groove.
Can be used mainly with 16mm T-Molding.
Check the compatibility of the groove of each T-Molding you use.
Slotting cutter arbor
Slotting Cutter Arbor.
Fits on any type of router.
This arbor is only compatible with Slotting Cutter for sale on this site.
Support for soldering iron
