Tools

Drill bit for 10mm diameter metal and titanium coating.

Drill bit for 3mm diameter metal and titanium coating.

Drill bit for 5mm diameter metal and titanium coating.

Drill bit for 8mm diameter metal and titanium coating.

Black and white mallet in semi-hard rubber.
It's the perfect companion to install any type of T-Molding.
Do not leave a mark.

Soldering powerful 30W ceramic for general purposes and lead-free soldering.

8mm hexagonal key. Fits perfectly to the cookie cutters sold on this site.
Exept the 32,5mm.

This wood wick allows for 24mm diameter holes in any type of wood (soft or solid).
The holes are made ​​clean.
Thanks to it you can create a panel for your needs.

This wood wick allows for 28mm diameter holes in any type of wood (soft or solid).
The holes are made ​​clean.
Thanks to it you can create a panel for your needs.

This wood wick allows for 30mm diameter holes in any type of wood (soft or solid).
The holes are made ​​clean.
Thanks to it you can create a panel for your needs.

This wood wick allows for 32mm diameter holes in any type of wood (soft or solid).
The holes are made ​​clean.
Thanks to it you can create a panel for your needs.

This punch allows for 24mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made ​​clean and does not bend the metal.
Thanks to it you can add buttons that you lack.

This punch allows for 28.3mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made ​​clean and does not bend the metal.
Thanks to it you can add buttons that you lack.

This punch allows for 30mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made ​​clean and does not bend the metal.
Thanks to it you can add buttons that you lack.

This punch allows for 32.5mm diameter holes in a sheet of thickness 1.5mm maximum.
The holes are made ​​clean and does not bend the metal.
Thanks to it you can add buttons that you lack.

This 1.6mm grooving disc will allow you to make a 1.6mm wide groove.
Can be used mainly with 19mm T-Molding.
Check the compatibility of the groove of each T-Molding you use.

This 2mm grooving disc will allow you to make a 2mm wide groove.
Can be used mainly with 16mm T-Molding.
Check the compatibility of the groove of each T-Molding you use.

welding quality consisting of tin and 60% lead at 40%.

Quality lead-free solder wire.