SmallCab
14.90 €
20% VAT incl.
20% VAT incl.
New JAMMA wiring, ideal for making or re-connecting a terminal.
This product is suitable for:
Joysticks with 4.8mm Terminals
Buttons with 4.8mm lugs
Joysticks with 4.8mm Terminals
Buttons with 4.8mm lugs
14.90 €
20% VAT incl.
20% VAT incl.
New JAMMA wiring, ideal for making or re-connecting a terminal.
This product is suitable for:
Joysticks with 6.3mm Terminals
Buttons with 4.8mm lugs
Joysticks with 6.3mm Terminals
Buttons with 4.8mm lugs
17.90 €
20% VAT incl.
20% VAT incl.
New JAMMA wiring,3 meters long ideal for making or restoring a terminal.
This product is suitable for:
Joysticks with 4.8mm Terminals
Buttons with 2.8mm lugs
This product is suitable for:
Joysticks with 4.8mm Terminals
Buttons with 2.8mm lugs
1 reviews
21.90 €
20% VAT incl.
20% VAT incl.
Kick harness CPS2/CPS3 Supergun SmallCab (from version 1.6 with a DB9 connector).
This allows you to harness kick simply and easily manage the buttons 4, 5 and 6 of your card CPS2 / 3.
This allows you to harness kick simply and easily manage the buttons 4, 5 and 6 of your card CPS2 / 3.
20% VAT incl.
20% VAT incl.
Bartop Kit widescreen, 19-inch to 24 inches 4/3 16/9.
This kit has been designed to offer an easy-quality product to rise.
The assembly is provided by cams and journals.
The bezels are marked and PMMA.
The full metal panel is tiltable thanks to its hinged measurement and lockable therein by latches.
The rear door closes wrench eliminating any risk of electric shock.
This kit has been designed to offer an easy-quality product to rise.
The assembly is provided by cams and journals.
The bezels are marked and PMMA.
The full metal panel is tiltable thanks to its hinged measurement and lockable therein by latches.
The rear door closes wrench eliminating any risk of electric shock.
20% VAT incl.
20% VAT incl.
Kit 'Miniborne' (small cabinet 1.30m high) two players for 19 "screen in 4/3.
With its 19mm melamine, you will find the spirit of the terminals of the 80s / 90s.
This high quality kit delivered in a flat pack will accompany you in your retro gaming project.
With its 19mm melamine, you will find the spirit of the terminals of the 80s / 90s.
This high quality kit delivered in a flat pack will accompany you in your retro gaming project.
Sold out
29.90 €
20% VAT incl.
20% VAT incl.
Williams flipper support kit for Pincab.
This kit will allow you an easy installation of your flippers inside your Pincab.
These brackets replace the original brackets.
The kit includes two Williams/Bally flipper brackets and all necessary hardware.
This kit will allow you an easy installation of your flippers inside your Pincab.
These brackets replace the original brackets.
The kit includes two Williams/Bally flipper brackets and all necessary hardware.
Sold out
11.95 €
20% VAT incl.
20% VAT incl.
This cage of foot is a plate-nut which is placed inside the box.
It makes it easy to screw your feet.
It makes it easy to screw your feet.
99.90 €
20% VAT incl.
20% VAT incl.
Leversless metal case from SmallCab.
With this box you can make a quality hit box.
With this box you can make a quality hit box.
9.90 €
20% VAT incl.
20% VAT incl.
Potentiometer support for Bally / Williams type ball lance.
This support consists of two metal elements, one for fixing the ball lance to the body and maintaining the potentiometer on the support. And, a second part placed on the rod and which makes its movement follow the potentiometer.
This support consists of two metal elements, one for fixing the ball lance to the body and maintaining the potentiometer on the support. And, a second part placed on the rod and which makes its movement follow the potentiometer.
9.90 €
20% VAT incl.
20% VAT incl.
Potentiometer support for Bally / Williams type mini ball lance.
This support consists of two metal elements, one for fixing the ball lance to the body and maintaining the potentiometer on the support. And, the second placed on the rod and which follows its movement to the potentiometer.
This support consists of two metal elements, one for fixing the ball lance to the body and maintaining the potentiometer on the support. And, the second placed on the rod and which follows its movement to the potentiometer.
5.90 €
20% VAT incl.
20% VAT incl.
This molex to terminal block converter will allow you to recover the 5V and 12V voltages from any molex connector of an ATX power supply.
The various voltages will be directly recoverable on the various terminal blocks provided for this purpose.
The various voltages will be directly recoverable on the various terminal blocks provided for this purpose.
27.90 €
20% VAT incl.
20% VAT incl.
To facilitate the installation of your LED Bar, we offer a flasher pack equipped with RGB LEDs already soldered.
This pack includes five 5V LED flashers as well as 5 transparent domes.
Each flasher has 4 +5V/R/G/B inputs.
They have a 4-pin terminal block (RGB and 5 volts) and a 3W LED perfectly suited to use.
This pack includes five 5V LED flashers as well as 5 transparent domes.
Each flasher has 4 +5V/R/G/B inputs.
They have a 4-pin terminal block (RGB and 5 volts) and a 3W LED perfectly suited to use.
39.90 €
20% VAT incl.
20% VAT incl.
To facilitate the installation of your LED Bar, we offer a flasher pack equipped with RGB LEDs already soldered.
This pack includes five 5V LED flashers as well as 5 transparent domes.
Each flasher has 4 +5V/R/G/B inputs.
They have a 4-pin terminal block (RGB and 5 volts) and a 3W LED perfectly suited to use.
This pack includes five 5V LED flashers as well as 5 transparent domes.
Each flasher has 4 +5V/R/G/B inputs.
They have a 4-pin terminal block (RGB and 5 volts) and a 3W LED perfectly suited to use.
74.90 €
20% VAT incl.
20% VAT incl.
The Shield KL25 pack is a simplified connection solution for your Pincab project.
This scalable pack will accompany you throughout the development of your Pincab project.
It will allow you to connect the first basic elements of your Pincab (buttons and ball launcher).
This scalable pack will accompany you throughout the development of your Pincab project.
It will allow you to connect the first basic elements of your Pincab (buttons and ball launcher).
169.90 €
20% VAT incl.
20% VAT incl.
Complete set of four black Williams / Bally type pinball / pincab feet.
The pack contains 4 feet, 4 adjustable jacks, 4 foot cages and 8 foot screws.
Foot for Pincab or Williams type pinball machine.
Set of 4 new black legs.
The pack contains 4 feet, 4 adjustable jacks, 4 foot cages and 8 foot screws.
Foot for Pincab or Williams type pinball machine.
Set of 4 new black legs.
1 reviews20% VAT incl.
20% VAT incl.
To make it easier for you to install your DMD tiles on your Pincab, we offer you a ready-to-install DMD P2.5 pack.
This pack includes two DMD P2.5 tiles installed on a frame/shield PCB, an ESP32 card and the ZeDMD software already installed which allows the reading of PAL/VNI files (but not PAC) This set will save you time when installing the DMD on your Pincab.
This pack includes two DMD P2.5 tiles installed on a frame/shield PCB, an ESP32 card and the ZeDMD software already installed which allows the reading of PAL/VNI files (but not PAC) This set will save you time when installing the DMD on your Pincab.
6.00 €
20% VAT incl.
20% VAT incl.
SmallCab presents its filter machine! This card will allow you to reduce the parasites that could be created by your toys. It is placed closest to the toy for maximum efficiency.
19.90 €
20% VAT incl.
20% VAT incl.
CHAMMA to JAMMA adapter.
This adapter fits between your game card and your Arcade/Supergun machine.
This adapter allows you to plug a Chinese JAMMA multi-game card (Pandora's Box series, 2, 3, 4, 5, 6, DX etc.) into a standard JAMMA terminal without modifying your wiring.
This adapter fits between your game card and your Arcade/Supergun machine.
This adapter allows you to plug a Chinese JAMMA multi-game card (Pandora's Box series, 2, 3, 4, 5, 6, DX etc.) into a standard JAMMA terminal without modifying your wiring.
56.90 €
20% VAT incl.
20% VAT incl.
The KL25Z expansion board is an additional board that allows you to add 16 PWM outputs to your freescale KL25Z.
This board connects to our shield with a simple RJ45 network cable.
Or directly with Dupont connectors on the dedicated port.
This board connects to our shield with a simple RJ45 network cable.
Or directly with Dupont connectors on the dedicated port.