SmallCab
Adapter - JAMMA voltmeter
JAMMA voltmeter adapter.
Just add a 5v + 12v voltmeter to your Arcade / Supergun terminal in seconds.
This adapter is inserted between your game card and your Arcade / Supergun terminal.
Its integrated switch allows you to select the voltage to be tested (+ 5v or + 12v).
In order to avoid any connection problem, our JAMMA Voltmeter interface has a G-pin key to prevent any connection error.
The adapter has four standard M3 mounting holes for mounting with PCB feet when needed.
Cable 80cm connector dupont - terminal 2.8mm
Cable with a duplex connector (2.54mm) on one side and a 2.8mm terminal insulated from the other.
Connects a SANWA button to the GPIO of a RaspBerry, a Xin-mo interface, or a minipac.
Cable 80cm connector dupont - terminal 4.8mm
Cable with a duplex connector (2.54mm) on one side and a 4.8mm terminal insulated from the other.
Connects joysticks or buttons equipped with 4.8mm microswitch to the GPIO of a RaspBerry, a USB Xin-mo interface or a minipac.
Cable 80cm connector dupont - terminal 6.3mm
Cable with a duplex connector (2.54mm) on one side and a 6.3mm terminal insulated from the other.
Connects joysticks or buttons equipped with 6.3mm microswitch to the GPIO of a RaspBerry, a USB Xin-mo interface or a minipac.
Deco Bartop 19 pouces - Arcade Goblins
Decoration for 19 "Smallart Bartop Kit.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop 19 pouces - Arcade Invaders
Decoration for 19 "Smallart Bartop Kit.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop 19 pouces - Arcade Kong
Decoration for 19 "Smallart Bartop Kit.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop 19 pouces - Arcade Monkey
Decoration for 19 "Smallart Bartop Kit.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop 19 pouces - Arcade World
Decoration for 19 "Smallart Bartop Kit.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop 19 pouces - Stone age
Decoration for 19 "Smallart Bartop Kit.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop DELUXE - Arcade Goblins
Decoration Kit DELUXE bartop Smallcab.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop DELUXE - Arcade Invaders
Decoration Kit DELUXE bartop Smallcab.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop DELUXE - Arcade Kong
Decoration Kit DELUXE bartop Smallcab.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop DELUXE - Arcade Monkey
Decoration Kit DELUXE bartop Smallcab.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop DELUXE - Arcade Stone Age
Decoration Kit DELUXE bartop Smallcab.
Printed on an adhesive vinyl with glossy UV coating.
Deco Bartop DELUXE - Arcade World
Decoration Kit DELUXE bartop Smallcab.
Printed on an adhesive vinyl with glossy UV coating.
Dupont cables male - female 20cm
Dupont male female cables of 20cm.
With this set of 20 cables, you will need to connect a STM32 card to the HUB75 cable of your DMD.
GPIO wiring 2.8mm - Raspberry 1 player
Cable kit to connect a joystick equipped with 4.8mm lugs and up to 9 buttons equipped with 2.8mm lugs on the GPIO port of RaspBerry Pi 2 or Pi 3.
GPIO wiring 2.8mm - Raspberry 2 players
Lot cable to connect two joysticks and 18 buttons on the GPIO port Raspberry Pi Pi 2 or 3.
GPIO wiring 4.8mm - Raspberry 1 player
Lot cable to connect one joysticks and 9 buttons on the GPIO port Raspberry Pi Pi 2 or 3.
