Samducksa
0.95 €
20% VAT incl.
20% VAT incl.
The 309-CWL membrane holder mounts inside the Crown / Samducksa silicone membrane.
This membrane support also allows the stick to be maintained during the movements of the joystick.
This membrane support also allows the stick to be maintained during the movements of the joystick.
0.95 €
20% VAT incl.
20% VAT incl.
The CWL DX Bobbin membrane holder installs inside the silicone membrane of your Crown/Samducksa joystick (see compatibility chart).
0.95 €
20% VAT incl.
20% VAT incl.
The 301-DX membrane holder installs inside the silicone membrane of your Crown/Samducksa joystick (see compatibility chart).
15.00 €
20% VAT incl.
20% VAT incl.
Red Capsule Handle,
of the same type as that originally present on the Knee Lever Neo Edition joysticks.
0.50 €
20% VAT incl.
20% VAT incl.
Original Circlip for Crown 303/307/309 joystick.
34.95 €
20% VAT incl.
20% VAT incl.
The Crazy Dongpal Crown CWL-303MJ-DX-ST35 joystick is an evolution of the Samducksa 303 series.
It has a short base (stick base), a 35gr membrane on a Crown DX base, an actuator for quick contacts and a short shaft with a twist battop.
It has a short base (stick base), a 35gr membrane on a Crown DX base, an actuator for quick contacts and a short shaft with a twist battop.
1 reviews
46.95 €
20% VAT incl.
20% VAT incl.
The Crown CWL-309MJ-New Helpme-ST30 joystick is the latest version of the Helpme 309 MJ.
This version was made with the Korean joystick modder "Helpme".
This 'V2' is characterized by four Gersung GSM-V1603A3HM micro switches.
This version was made with the Korean joystick modder "Helpme".
This 'V2' is characterized by four Gersung GSM-V1603A3HM micro switches.
29.95 €
20% VAT incl.
20% VAT incl.
The Crown CWL-309Helpme-K-KMS-ST35 joysticks on the South Korean company SAMDUCKSA are arcade Professional quality joysticks.
They are used by professional players in the tournament (including TEKKEN).
The 309MJ versions use a system voltage rubber to provide a unique gameplay.
This allows such a rapid return to neutral, which is essential for fight games.
They are used by professional players in the tournament (including TEKKEN).
The 309MJ versions use a system voltage rubber to provide a unique gameplay.
This allows such a rapid return to neutral, which is essential for fight games.
33.95 €
20% VAT incl.
20% VAT incl.
The Crown CWL-309MJ-BENYLIS-ST35 joystick is the latest version of the famous Crown / Samducksa 309 MJ family.
This version was made with the Korean joystick modder "Benylis".
It is distinguished by its micro switch Starion SZM-V16-2FA-83 which replaces the traditional Gersung GSM-V1623A2 or GSM-V1623A3.
This version was made with the Korean joystick modder "Benylis".
It is distinguished by its micro switch Starion SZM-V16-2FA-83 which replaces the traditional Gersung GSM-V1623A2 or GSM-V1623A3.
29.95 €
20% VAT incl.
20% VAT incl.
The Crown CWL-309MJ-KMS-ST35 joysticks on the South Korean company SAMDUCKSA are arcade Professional quality joysticks.
They are used by professional players in the tournament (including TEKKEN).
The 309MJ versions use a system voltage rubber to provide a unique gameplay.
This allows such a rapid return to neutral, which is essential for fight games.
They are used by professional players in the tournament (including TEKKEN).
The 309MJ versions use a system voltage rubber to provide a unique gameplay.
This allows such a rapid return to neutral, which is essential for fight games.
5.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown/Samducksa 303/309 Series joystick levers.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
5.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown/Samducksa 303/309 Series joystick levers.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
5.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown/Samducksa 303/309 Series joystick levers.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
5.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown/Samducksa 303/309 Series joystick levers.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
2 reviews
5.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown/Samducksa 303/309 Series joystick levers.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
5.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown/Samducksa 303/309 Series joystick levers.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it.
The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
12.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown / Samducksa Crazy Dongpal.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
12.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown / Samducksa Crazy Dongpal.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
12.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown / Samducksa Crazy Dongpal.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
12.95 €
20% VAT incl.
20% VAT incl.
Replacement battop for Crown / Samducksa Crazy Dongpal.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.