This kit, made of Sanwa joysticks and chrome plated buttons, contains all the elements you need for a two-player setup under Raspberry.
You can choose the length of the shaft of the joysticks according to your type of panel, wood or metal.
Lire la suite
Available Options:
| 1) Shaft type | |
| 2) Handle player 1 | |
| 3) Handle player 2 | |
| 4) Buttons player 1 | |
| 5) Buttons player 2 | |
| 6) Start Buttons J1 & J2 | |
| 6) Start Buttons P1 & P2 | |
| 8) Hot Key button | |
| 9) Micro switch | |
| Gpio wiring | |
In stock
Buy this item and earn 120 points valued at 6.00 €.
Product Description
This kit, made of Sanwa joysticks and chrome plated buttons, contains all the elements you need for a two-player setup under Raspberry.
You can choose the length of the shaft of the joysticks according to your type of panel, wood or metal.
The SANWA JLF-TP-8YT joysticks in this kit are the reference for the arcade joystick.
They are found on many Candy Cab (Japanese seating posts) as well as on high-end console stick.
The luminous buttons with chrome surround are supplied with led and all wiring required for their power supply.
Once connected, these buttons will illuminate your panel and your gameroom beautifully.
A bundle of cable is included with the kit to connect joysticks and buttons directly to the RaspBerry's GPIO port.
This kit is a perfect mix between high-end joystick and bright buttons.
Features
SANWA joystick (not bright)
Shaft: short (metal panel) or long (wood panel)
Model SANWA JLF-TP-8YT with 4 or 8-way guide (GT-8F)
Flat mounting plate included
Microswitch: Omron
Buttons
Screwable: with mounting ring
Diameter of drilling: 28mm
Terminals: 4.8mm
Shape: Plate
Microswitch: standard (or Cherry D44X optional)
Wiring
17 wires of 80cm with a connector of dupont and lug of 4.8mm.
2 wires of 80cm with a common ground chain provided with a dupont connector and 4.8mm terminals to connect the buttons.
2 specific 80cm cables to connect the SANWA JLF-TP-8YT joystick to the Raspberry GPIO.
Kit Contents
- 2 joysticks SANWA JLF-TP-8YT with short stick (metal panel) or long (wood panel)
- 6 buttons for player 1
- 6 buttons for player 2
- 1 Start button and 1 Select button for player 1
- 1 Start button and 1 Select button for Player 2
- 1 Hot Key button shared by both players
- 1 Power cable for light buttons
- 1 power supply 12V
- 1 set of cables for GPIO in 4.8mm to connect the buttons to RaspBerry
- 2 JLF-H cables with Dupont connector to connect the joysticks to the RaspBerry.
N.B: If you take the option 'With USB cable and Xinmotek PCB', the cables provided will be 40 / 50cm.
Options
Microswitch buttons
Standard: economic solution
Cherry D44X: more flexible and less noisy for better gaming comfort
GPIO cabling
4.8mm: Economical solution for directly connecting your joystick and buttons to the GPIO of RaspBerry
With USB cable and Xinmotek PCB: Allows to move the wiring of the joystick and buttons to a PCB. Easily replace your RaspBerry with a pc without rewiring. The length of the cables are then 40/50cm.
Note: The Raspberry Pi5 doesn't allow joysticks to be connected directly to the GPIO ports, so you'll need a USB interface.
If you have a Raspberry Pi5, you'll need to select the "GPIO Wiring - with USB cable and Xin-Mo PCB" option on the product page.
Documentation
Customers who bought this product also purchased
