New Products

Standard inner ballpoint spring used on many Williams / Bally pinball machines.
Reference Williams / Bally # 10-148-1.

This cage of foot is a plate-nut which is placed inside the box.
It makes it easy to screw your feet.

American screw (3/8th inch) chrome for Pincab or Flipper feet Williams, Bally, Data East, Sega and Stern.
The screws are fixed on the foot cage (or inner nut plates).

Chain common ground.

Ball lance with transparent blue handle for pinball or pincab.

Ball lance with transparent red handle for pinball or pincab.

Ball lance with transparent handle for pinball or pincab.

This kit consists of joysticks and arcade buttons contains all the elements you need to create your arcade stick.
It is ideal for an arcade or a cocktail.
Bright buttons with chrome rim come with LED and all necessary wiring to their diet.

Complete wiring for Pandora Box 6 / DX family card.
Wiring identical to that supplied as original.
It contains all the connections to link your joysticks and buttons to your Pandora Box 6 or DX card (family version only).

The SANWA joystick JLF-TP-8S is a high quality joystick delivered with an S-plate. It is one of the best Japanese joysticks. It will accompany you whatever your style of games (Fight, Shoot'em up).

The sparkling handle from Seimitsu!
Seimitsu brand transparent green “bubble” ball grip suitable for all joysticks of this reference brand.
With its 6mm thread, this handle fits perfectly on Zippy, Seimitsu or Sanwa joysticks.

Set of 4 M4 * 10 insert.
These inserts allow you to install your joysticks on a wood panel (MDF or melamine) with metal screws.

Lot of two DMD 160mm x 80mm representing a total display of 320mm x 80mm.
Supplied with its power cable and HUB75 connection cables.

High quality stereo linear slide potentiometer, in metal case.
Ideal for handling a ball lance.

Arcade speed selector with four micro switch for report management.

Speaker grille 100 clip-on.
This is the 'standard' version that fitted a large number of JEUTEL arcade bollards.
Only the central logo differs, the manufacturer's logo replaces the Jeutel logo.

18mm lock with identical key
The screwable part is 15mm.
The lock is installed in a 19mm diameter hole.

Door switch.
Allows you to cut off the power supply circuit accessories or illumination etc.
This element is to be connected directly after the phase of your input module. It cuts off the electrical input as soon as you open the door of your Arcade / Bartop terminal.
 

This kit, consisting of joysticks and arcade buttons, contains all the elements you need to equip / customize the panel of your stick or arcade. You can choose the length of the joystick rod depending on whether your panel is wood or metal.

Marquee for Arcade Terminal 'ARCADES Electronic'.
Replaces the worn / damaged decoration of your original brand.
CAUTION:The Arcades Electronic terminals were available in multiple widths. Check before purchase.