New Products
44.90€
Flexible conductors, PVC insulated for general use.
Its 1mm sector allows it to be used up to 17A.
Its 1mm sector allows it to be used up to 17A.
44.90€
Flexible conductors, PVC insulated for general use.
Its 1mm sector allows it to be used up to 17A.
Its 1mm sector allows it to be used up to 17A.
Single door in black metal for pinball or virtual pinball.
This door is installed on a wooden support using four included screws.
This door is installed on a wooden support using four included screws.
27.90€
To facilitate the installation of your LED Bar, we offer a flasher pack equipped with RGB LEDs already soldered.
This pack includes five 5V LED flashers as well as 5 transparent domes.
Each flasher has 4 +5V/R/G/B inputs.
They have a 4-pin terminal block (RGB and 5 volts) and a 3W LED perfectly suited to use.
This pack includes five 5V LED flashers as well as 5 transparent domes.
Each flasher has 4 +5V/R/G/B inputs.
They have a 4-pin terminal block (RGB and 5 volts) and a 3W LED perfectly suited to use.
44.90€
Green beacon equipped with a spiral cable of approximately 2 meters.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
44.90€
Red beacon equipped with a spiral cable of approximately 2 meters.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
44.90€
Blue beacon equipped with a spiral cable of approximately 2 meters.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
44.90€
Orange beacon equipped with a spiral cable of approximately 2 meters.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
Suitable for occasional use as Pincab toys.
To be installed on the pediment (topper) of your pincab.
With the beacon we deliver a PCB which includes a freewheel diode and a capacitor which filters the parasitic returns generated by the beacon.
N.B: The product has scratches on the outer shell.
IMPORTANT : - It is forbidden to use it on a vehicle without authorization.
19.90€
The PCB Mosfet x4 is a card allowing to manage up to 4 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
1 reviews
Sanwa OBSFE-24 black snap-in pushbutton for metal control panel.
Set of four square collar screws for flipper coin door.
33.50€
The Mosfet x8 PCB is a card for managing up to 8 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
24.95€
The Shield KL25 - Plunger is a simplified connection solution for your Pincab project.
This shield will allow you to easily connect all the buttons you want as well as 8 PWM outputs and 8 digital outputs.
This shield will allow you to easily connect all the buttons you want as well as 8 PWM outputs and 8 digital outputs.
To make it easier for you to install your DMD tiles on your Pincab, we offer you a ready-to-install DMD P2.5 pack.
This pack includes two DMD P2.5 tiles installed on a frame/shield PCB, an ESP32 card and the ZeDMD software already installed which allows the reading of PAL/VNI files (but not PAC) This set will save you time when installing the DMD on your Pincab.
This pack includes two DMD P2.5 tiles installed on a frame/shield PCB, an ESP32 card and the ZeDMD software already installed which allows the reading of PAL/VNI files (but not PAC) This set will save you time when installing the DMD on your Pincab.
To make it easier for you to install your DMD panels on your Pincab, we offer a ZeDMD shield compatible with P2.5 and P3 panels.
Our offer consists of a shield (PCB) on which an ESP32 (Wroom32) card is installed with the ZeDMD software installed
This set will make it easier for you to install DMD tiles based on the ZeDMD software solution on your Pincab.
Our offer consists of a shield (PCB) on which an ESP32 (Wroom32) card is installed with the ZeDMD software installed
This set will make it easier for you to install DMD tiles based on the ZeDMD software solution on your Pincab.
SmallCab presents its filter machine! This card will allow you to reduce the parasites that could be created by your toys. It is placed closest to the toy for maximum efficiency.
