JAMMA voltmeter adapter.
Just add a 5v + 12v voltmeter to your Arcade / Supergun terminal in seconds.
This adapter is inserted between your game card and your Arcade / Supergun terminal.
Its integrated switch allows you to select the voltage to be tested (+ 5v or + 12v).
In order to avoid any connection problem, our JAMMA Voltmeter interface has a G-pin key to prevent any connection error.
The adapter has four standard M3 mounting holes for mounting with PCB feet when needed.
Interface card to connect a PC to your base JAMMA standard.
WARNING!, The video signal is not converted to 15Khz, you should use a software program such as arcmon.sys back or soft 15Khz under windows.
Interface card to connect a PC to your base JAMMA standard.
WARNING!, The video signal is converted to 15Khz, you should use a software program such as arcmon.sys back or soft 15Khz under windows.
Interface card to connect a JVS PCB (like Naomi) to your arcade JAMMA cabinet.
N.B: This product is used.
Carte d'interface permettant de brancher un pc sur votre borne au standard JAMMA.
Interface card to connect a PC to your base JAMMA standard.
WARNING!, The video signal is converted to 15Khz, you should use a software program such as arcmon.sys back or soft 15Khz under windows.
The Pi2JAMMA is a PCB that connects your RaspBerry to a JAMMA connector.
It allows a 15Khz audio / video output on a JAMMA connector.
The joysticks / buttons are also managed on the JAMMA port.
To do this, the Pi2JAMMA connects very simply to the GPIO interface of RaspBerry.
The sound is recovered from the headphone jack via an audio cable.
The Pi2JAMMA does not need extra power to operate.