GPIO cable

Cable with a duplex connector (2.54mm) on one side and a 2.8mm terminal insulated from the other.
Connects a SANWA button to the GPIO of a RaspBerry, a Xin-mo interface, or a minipac.

Cable with a duplex connector (2.54mm) on one side and a 4.8mm terminal insulated from the other.
Connects joysticks or buttons equipped with 4.8mm microswitch to the GPIO of a RaspBerry, a USB Xin-mo interface or a minipac.

Cable with a duplex connector (2.54mm) on one side and a 6.3mm terminal insulated from the other.
Connects joysticks or buttons equipped with 6.3mm microswitch to the GPIO of a RaspBerry, a USB Xin-mo interface or a minipac.

Cable kit to connect a joystick equipped with 4.8mm lugs and up to 9 buttons equipped with 2.8mm lugs on the GPIO port of RaspBerry Pi 2, Pi 3 or Pi 4.
Joystick/button wiring is not supported on Raspberry Pi5.

Lot cable to connect two joysticks and 17 buttons on the GPIO port RaspBerry Pi 2, Pi 3 or Pi 4
Joystick/button wiring is not supported on Raspberry Pi5.

Lot cable to connect one joysticks and 9 buttons on the GPIO port Raspberry Pi 2, Pi 3 or Pi 4.
Joystick/button wiring is not supported on Raspberry Pi5.

Lot cable to connect two joysticks and 17 buttons on the GPIO port RaspBerry Pi 2, Pi 3 or Pi 4.
Joystick/button wiring is not supported on Raspberry Pi5.

Cable kit to connect a joystick equipped with 6.3mm lugs and up to 9 buttons equipped with 4.8mm lugs on the GPIO port of RaspBerry Pi 2, Pi 3 or Pi 4.
Joystick/button wiring is not supported on Raspberry Pi5.

Lot of cables to connect two joysticks fitted with 6.3mm lugs and 17 buttons equipped with 4.8mm lugs on the GPIO port RaspBerry Pi 2, Pi 3 or Pi 4.
Joystick/button wiring is not supported on Raspberry Pi5.