GPIO

Cable with a duplex connector (2.54mm) on one side and a 2.8mm terminal insulated from the other.
Connects a SANWA button to the GPIO of a RaspBerry, a Xin-mo interface, or a minipac.

Cable with a duplex connector (2.54mm) on one side and a 4.8mm terminal insulated from the other.
Connects joysticks or buttons equipped with 4.8mm microswitch to the GPIO of a RaspBerry, a USB Xin-mo interface or a minipac.

Cable with a duplex connector (2.54mm) on one side and a 6.3mm terminal insulated from the other.
Connects joysticks or buttons equipped with 6.3mm microswitch to the GPIO of a RaspBerry, a USB Xin-mo interface or a minipac.

Cable kit to connect a joystick equipped with 4.8mm lugs and up to 9 buttons equipped with 2.8mm lugs on the GPIO port of RaspBerry Pi 2, Pi 3 or Pi 4.

Lot cable to connect two joysticks and 17 buttons on the GPIO port RaspBerry Pi 2, Pi 3 or Pi 4

Lot cable to connect one joysticks and 9 buttons on the GPIO port Raspberry Pi 2, Pi 3 or Pi 4.

Lot cable to connect two joysticks and 17 buttons on the GPIO port RaspBerry Pi 2, Pi 3 or Pi 4.

Cable kit to connect a joystick equipped with 6.3mm lugs and up to 9 buttons equipped with 4.8mm lugs on the GPIO port of RaspBerry Pi 2, Pi 3 or Pi 4.

Lot of cables to connect two joysticks fitted with 6.3mm lugs and 17 buttons equipped with 4.8mm lugs on the GPIO port RaspBerry Pi 2, Pi 3 or Pi 4.

This RaspBerry GPIO Port Expansion PCB will allow you to easily install your GPIO cabling.
It has a joysticks / buttons installation legend that corresponds to the wiring diagram of the RecalBox distribution.