LED Controller - PACLED 64 USB

Product Description

The PACLED 64 is a USB interface that allows you to control up to 64 LED monochrome or RGB LED 21 + 1 monochrome.
The interface can manage up to 256 brightness levels.

Features

Connection pin
Manages up to 64 LED RGB 256 brightness level.
Manages single LED (1 connector) or RGB (3 connectors)
constant current, requires no resistor for each LED
Can be used with LED inserts with resistance if necessary
Stoque 128 orders for sequences attrack mode that starts immediately when the PC starts.

Includes power cable to connect to an ATX power supply or on a hard drive for power.
Ability to change the map of ID cards to connect multiple PacLed64
Compatible with LEDBLINK software
Compatible with our buttons with LEDs RGB

Installation

Connection Directory LEDs Each LED must have its negative pole (cathode) connected to a number of pins 1 through 64.
Each LED should have its positive pole (anode) connected to a pin labeled "+".
You can use any pin "+", they are all interconnected on the PCB.
Alternatively a chain to connect several LEDs on a single pin "+".
The diagram below shows three LEDs connected to channels 31 to 33.

Kit Contents

A PCB PacLED64
A USB Type A male / male Mini B (1.5m).
A power cable.
Four Self-adhesive spacer for PCB