Controller cards
Optimize the performance of your Pincab with our range of high-end controller boards. From Mosfet PCBs and Pin2DMDs to Freescale boards and plunger controllers, every element has been designed to deliver the ultimate virtual pinball experience. Whether you're an arcade enthusiast or a demanding professional, these boards will deliver the power, precision and reliability you need for total immersion. Mosfet PCBs guarantee smooth control of solenoids and motors, while Pin2DMDs ensure a vivid DMD display. Freescale boards offer exceptional performance for handling complex interactions. And plunger controllers let you experience the authentic feel of a marble throw. Easy to install and compatible with most systems, these controller boards are the key to unlocking the full potential of your Pincab.
Result Pages:
0.50 €
20% VAT incl.
20% VAT incl.
20cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
0.50 €
20% VAT incl.
20% VAT incl.
20cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
3.80 €
20% VAT incl.
20% VAT incl.
20cm Dupont male female cables.
With this set of 40 cables, you will have the necessary to connect a Freescale card to Mosfets to control Toys.
With this set of 40 cables, you will have the necessary to connect a Freescale card to Mosfets to control Toys.
0.50 €
20% VAT incl.
20% VAT incl.
40cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
0.50 €
20% VAT incl.
20% VAT incl.
40cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
7.90 €
20% VAT incl.
20% VAT incl.
The button card for KL25Z Smallcab shield is an additional card that allows you to easily connect 7 buttons of your pincab.
This card connects to our shield by an 8-point ribbon cable.
This card connects to our shield by an 8-point ribbon cable.
1.90 €
20% VAT incl.
20% VAT incl.
JST-XH connection cable (female to female) with a length of approximately 80 cm.
It is equipped with connectors to the JST-XH standard.
It is suitable for connecting the Smallcab SC-plunger board to the SmallCab KL25Z Shield board.
It is equipped with connectors to the JST-XH standard.
It is suitable for connecting the Smallcab SC-plunger board to the SmallCab KL25Z Shield board.
7.90 €
20% VAT incl.
20% VAT incl.
USB Power is a card that allows you to:
- Provide more amperage to your USB devices.
- Turn off the power of your USB devices when the PC is off.
- Provide more amperage to your USB devices.
- Turn off the power of your USB devices when the PC is off.
11.90 €
20% VAT incl.
20% VAT incl.
PJRC octoWS2811 adapter.
Used with a Teensy 3.2 microcontroller, it will allow you to drive a 'ledstrip' on your pincab.
Used with a Teensy 3.2 microcontroller, it will allow you to drive a 'ledstrip' on your pincab.
74.90 €
20% VAT incl.
20% VAT incl.
The Shield KL25 pack is a simplified connection solution for your Pincab project.
This scalable pack will accompany you throughout the development of your Pincab project.
It will allow you to connect the first basic elements of your Pincab (buttons and ball launcher).
This scalable pack will accompany you throughout the development of your Pincab project.
It will allow you to connect the first basic elements of your Pincab (buttons and ball launcher).
6.00 €
20% VAT incl.
20% VAT incl.
SmallCab presents its filter machine! This card will allow you to reduce the parasites that could be created by your toys. It is placed closest to the toy for maximum efficiency.
56.90 €
20% VAT incl.
20% VAT incl.
The KL25Z expansion board is an additional board that allows you to add 16 PWM outputs to your freescale KL25Z.
This board connects to our shield with a simple RJ45 network cable.
Or directly with Dupont connectors on the dedicated port.
This board connects to our shield with a simple RJ45 network cable.
Or directly with Dupont connectors on the dedicated port.
19.90 €
20% VAT incl.
20% VAT incl.
The PCB Mosfet x4 is a card allowing to manage up to 4 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
33.50 €
20% VAT incl.
20% VAT incl.
The Mosfet x8 PCB is a card for managing up to 8 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
10.50 €
20% VAT incl.
20% VAT incl.
This PCB has 5 buttons and a six point terminal block.
It offers five service buttons (Door, volume management (+ -), Exit and Enter).
It offers five service buttons (Door, volume management (+ -), Exit and Enter).
59.90 €
20% VAT incl.
20% VAT incl.
The STM32 NUCLEO 144 - F429ZI PCB is the development board used by the V4 shields of the Pin2DMD team.
This card will ensure long-term support for the evolutions of the Pin2DMD software.
This card will ensure long-term support for the evolutions of the Pin2DMD software.
1 reviews
49.95 €
20% VAT incl.
20% VAT incl.
The Freescale FRDM KL25Z Card is an indispensable element for any Pincab project.
We offer it here with its pin male connection and Firmware 'Pinscape' installed.
Since the firmware of 09/2024 can generate bugs with the DOF, we deliver the KL25Z with the firmware of 12/2021.
The PCB being installed / configured by our technical service there can be no failure at startup!
We offer it here with its pin male connection and Firmware 'Pinscape' installed.
Since the firmware of 09/2024 can generate bugs with the DOF, we deliver the KL25Z with the firmware of 12/2021.
The PCB being installed / configured by our technical service there can be no failure at startup!
1.50 €
20% VAT incl.
20% VAT incl.
Ribbon cable of 10 strands with a length of 15cm.
Perfectly adapted to our mosfet x4 or mosfet x8 boards
Perfectly adapted to our mosfet x4 or mosfet x8 boards
2.00 €
20% VAT incl.
20% VAT incl.
Ribbon cable of 6 strands with a length of 110cm.
Perfectly adapted to our service buttons card, it allows to connect it to our Shield KL25Z.
Perfectly adapted to our service buttons card, it allows to connect it to our Shield KL25Z.
14.90 €
20% VAT incl.
20% VAT incl.
The SC-Plunger pack is a simplified connection solution.
It consists of a linear stereo slide potentiometer, on which is soldered a PCB with six connectors.
Three connectors will connect the potentiometer to the KL25Z.
And, three additional connectors will allow you to connect up to three buttons.
It consists of a linear stereo slide potentiometer, on which is soldered a PCB with six connectors.
Three connectors will connect the potentiometer to the KL25Z.
And, three additional connectors will allow you to connect up to three buttons.
Result Pages: