Controller cards

20cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.

20cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.

20cm Dupont male female cables.
With this set of 40 cables, you will have the necessary to connect a Freescale card to Mosfets to control Toys.

JST-XH connection cable (female to female) with a length of approximately 80 cm.
It is equipped with connectors to the JST-XH standard.
It is suitable for connecting the Smallcab SC-plunger board to the SmallCab KL25Z Shield board.

USB Power is a card that allows you to:
- Provide more amperage to your USB devices.
- Turn off the power of your USB devices when the PC is off.

The Shield KL25 pack is a simplified connection solution for your Pincab project.
This scalable pack will accompany you throughout the development of your Pincab project.
It will allow you to connect the first basic elements of your Pincab (buttons and ball launcher).

SmallCab presents its filter machine! This card will allow you to reduce the parasites that could be created by your toys. It is placed closest to the toy for maximum efficiency.

The PCB Mosfet x4 is a card allowing to manage up to 4 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.

The Mosfet x8 PCB is a card for managing up to 8 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.

This PCB has 5 buttons and a six point terminal block.
It offers five service buttons (Door, volume management (+ -), Exit and Enter).

The STM32 NUCLEO 144 - F429ZI PCB is the development board used by the V4 shields of the Pin2DMD team.
This card will ensure long-term support for the evolutions of the Pin2DMD software.

Ribbon cable of 10 strands with a length of 15cm.
Perfectly adapted to our mosfet x4 or mosfet x8 boards

Ribbon cable of 6 strands with a length of 80cm.
Perfectly adapted to our service buttons card, it allows to connect it to our Shield KL25Z.

The SC-Plunger pack is a simplified connection solution.
It consists of a linear stereo slide potentiometer, on which is soldered a PCB with six connectors.
Three connectors will connect the potentiometer to the KL25Z.
And, three additional connectors will allow you to connect up to three buttons.

High quality stereo linear slide potentiometer, in metal case.
Ideal for handling a ball lance.

The Shield KL25 - Plunger is a simplified connection solution for your Pincab project.
This shield will allow you to easily connect all the buttons you want as well as 8 PWM outputs and 8 digital outputs.

This kit includes a Teensy 3.2 microcontroller and an octoWS2811 PJRC adapter.
This kit is frequently used as 'ledstrips controllers' on the pincab.