JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

20cm JST XH cable - 2.8mm terminals
0.50 €
20% VAT incl.
20cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
   In stock  Buy Now
20cm JST XH cable - 4.8mm terminals
0.50 €
20% VAT incl.
20cm JST XH cable - 2.8mm terminals
This cable is perfectly adapted to our SC-plunger and allows you to easily connect a Gold Leaf type button.
   In stock  Buy Now
40 Dupont cables female - female 20cm
3.80 €
20% VAT incl.
20cm Dupont male female cables.
With this set of 40 cables, you will have the necessary to connect a Freescale card to Mosfets to control Toys.
   In stock  Buy Now
Cable JST-XH - Female/female - 6 points - 80cm
JST-XH connection cable (female to female) with a length of approximately 80 cm.
It is equipped with connectors to the JST-XH standard.
It is suitable for connecting the Smallcab SC-plunger board to the SmallCab KL25Z Shield board.
   In stock  Buy Now
Carte USB Power
7.90 €
20% VAT incl.
USB Power is a card that allows you to:
- Provide more amperage to your USB devices.
- Turn off the power of your USB devices when the PC is off.
   In stock  Buy Now
Pack KL25Z + Shield
88.90 €
20% VAT incl.
The Shield KL25 pack is a simplified connection solution for your Pincab project.
This scalable pack will accompany you throughout the development of your Pincab project.
It will allow you to connect the first basic elements of your Pincab (buttons and ball launcher).
   In order  Buy Now
PCB - Diode / Condo 1 000 µF
6.00 €
20% VAT incl.
SmallCab presents its filter machine! This card will allow you to reduce the parasites that could be created by your toys. It is placed closest to the toy for maximum efficiency.
   In stock  Buy Now
PCB Mosfet x4
19.90 €
20% VAT incl.
The PCB Mosfet x4 is a card allowing to manage up to 4 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
   In stock  Buy Now
PCB Mosfet x8
33.50 €
20% VAT incl.
The Mosfet x8 PCB is a card for managing up to 8 digital or PWM outputs.
Mosfets are used to power toys such as solenoids, contactors, shakers etc.
   In stock  Buy Now
PCB Service buttons
10.50 €
20% VAT incl.
This PCB has 5 buttons and a six point terminal block.
It offers five service buttons (Door, volume management (+ -), Exit and Enter).
   In order  Buy Now
Pin2DMD - PCB STM32 NUCLEO 144 - F429ZI
44.90 €
20% VAT incl.
The STM32 NUCLEO 144 - F429ZI PCB is the development board used by the V4 shields of the Pin2DMD team.
This card will ensure long-term support for the evolutions of the Pin2DMD software.
   In stock  Buy Now
Pre-configured Freescale FRDM KL25Z board
The Freescale FRDM KL25Z Card is an indispensable element for any Pincab project.
We offer it here with its pin male connection and Firmware 'Pinscape' installed.
The PCB being installed / configured by our technical service there can be no failure at startup!
   In stock  Buy Now
Ribbon 10 points - 15cm
1.50 €
20% VAT incl.
Ribbon cable of 10 strands with a length of 15cm.
Perfectly adapted to our mosfet x4 or mosfet x8 boards
   In stock  Buy Now
Ribbon 6 points - 80cm
2.00 €
20% VAT incl.
Ribbon cable of 6 strands with a length of 80cm.
Perfectly adapted to our service buttons card, it allows to connect it to our Shield KL25Z.
   In stock  Buy Now
SC-plunger pack - slide potentiometer, 10 kohm, 100 mm
The SC-Plunger pack is a simplified connection solution.
It consists of a linear stereo slide potentiometer, on which is soldered a PCB with six connectors.
Three connectors will connect the potentiometer to the KL25Z.
And, three additional connectors will allow you to connect up to three buttons.
   In stock  Buy Now
Shield Freescale KL25Z
24.95 €
20% VAT incl.
The Shield KL25 - Plunger is a simplified connection solution for your Pincab project.
This shield will allow you to easily connect all the buttons you want as well as 8 PWM outputs and 8 digital outputs.
   In stock  Buy Now
Slide potentiometer, 10 kohm, 100 mm
7.90 €
20% VAT incl.
High quality stereo linear slide potentiometer, in metal case.
Ideal for handling a ball lance.
   In stock  Buy Now
Teensy 3.2 and OctoWS2811 PJRC
47.90 €
20% VAT incl.
This kit includes a Teensy 3.2 microcontroller and an octoWS2811 PJRC adapter.
This kit is frequently used as 'ledstrips controllers' on the pincab.
   Sold out