Arcade Forge

The Pi2JAMMA is a PCB that connects your RaspBerry to a JAMMA connector.
It allows a 15Khz audio / video output on a JAMMA connector.
The joysticks / buttons are also managed on the JAMMA port.
To do this, the Pi2JAMMA connects very simply to the GPIO interface of RaspBerry.
The sound is recovered from the headphone jack via an audio cable.
The Pi2JAMMA does not need extra power to operate.

Pi2SCART is a PCB that gives you 15Khz RGB via SCART interface.
PI2SCART will be plugged on GPIO interface. Sound will be provided via cable from Raspberry Pi to PI2SCART.
PI2SCART needs no extra power supply

Scanline generator SLG SCART aims to generate an Scanline 'for (a dark line sandwiched between two lines).
It is aimed at recent TVs (PLASMA / LCD / LED) equipped with a SCART input.
This adapter allows to find the same display as the old Arcade cabinet.

Scanline generator SLG SCART aims to generate an Scanline 'for (a dark line sandwiched between two lines).
It is aimed at recent TVs (PLASMA / LCD / LED) equipped with a SCART input.
This adapter allows to find the same display as the old Arcade cabinet.

SLG 3000 is another comunity based product. It´s purpose is to generate scanlines for VGA standard 640 x 480 using modern display.

This adapter allows you to find the same display as the Arcade cabinet at the time. To find the famous 'feeling'.
For this, the SLG 3000 generates a 'Scanline' (a dark line sandwiched between two lines) on the VGA screen (640 x 480 Display).

The UMSA allows you to connect your computer to a CRT television via a SCART socket.
This product does not do 'down scalling', it is up to your computer to provide a 15Khz signal.
For this you can use the Calimity or WinModelines drivers for example.
For the audio part, 2 RCA sockets to be connected to the source allow the signal to be injected into the SCART socket.