Seimitsu Co.
0.70 €
20% VAT incl.
20% VAT incl.
The Seimitsu LS-32 - Dust Washer is an anti dust protection disc for Seimitsu LS-32 joysticks.
This washer dust settles over the panel.
This washer dust settles over the panel.
19.90 €
20% VAT incl.
20% VAT incl.
This marble effect shaft will come with your Seimitsu marble handle.
This shaft only installs on the LS-32 joystick range.
This shaft only installs on the LS-32 joystick range.
2 reviews
5.90 €
20% VAT incl.
20% VAT incl.
The long shaft for Seimitsu LS-32 joysticks is a 15mm shaft higher than the original.
This shaft has been designed to allow the installation of a Seimitsu LS-32 joystick on a wood panel.
This shaft has been designed to allow the installation of a Seimitsu LS-32 joystick on a wood panel.
1.90 €
20% VAT incl.
20% VAT incl.
Original Seimitsu LS-32 joystick pivot.
This pivot allows free movement of the joystick rod.
This part is based on the Seimitsu LS-32 base which is lubricated with grease to prevent premature wear.
This pivot allows free movement of the joystick rod.
This part is based on the Seimitsu LS-32 base which is lubricated with grease to prevent premature wear.
19.90 €
20% VAT incl.
20% VAT incl.
This marble effect shaft will come with your Seimitsu marble handle.
This shaft only installs on the LS-32 joystick range.
This shaft only installs on the LS-32 joystick range.
19.90 €
20% VAT incl.
20% VAT incl.
This marble effect shaft will come with your Seimitsu marble handle.
This shaft only installs on the LS-32 joystick range.
This shaft only installs on the LS-32 joystick range.
1.49 €
20% VAT incl.
20% VAT incl.
Original spring for Seimitsu LS-32 joystick.
1.40 €
20% VAT incl.
20% VAT incl.
This spring holder is for Seimitsu joysticks of the LS-32 series.
This original piece is manufactured by Seimitsu.
This original piece is manufactured by Seimitsu.
19.90 €
20% VAT incl.
20% VAT incl.
This marble effect shaft will come with your Seimitsu marble handle.
This shaft only installs on the LS-32 joystick range.
This shaft only installs on the LS-32 joystick range.
2 reviews
2.90 €
20% VAT incl.
20% VAT incl.
Extension for Seimitsu LS-32 joystick (except LS-32-SC and LS-32-01-SC) or LSQ-40.
This extension allows you to increase the height of the rod by 1.5 cm, and to install your LS-32/LSQ-40 joysticks on a wooden panel.
This extension allows you to increase the height of the rod by 1.5 cm, and to install your LS-32/LSQ-40 joysticks on a wooden panel.
14.95 €
20% VAT incl.
20% VAT incl.
Does the handle of your Seimitsu LS-32 protrude from your backpack when moving?
The Seimitsu LS-32 NT 'Shaft QR' is the solution to this problem.
This new removable stem for LS-32 joystick has been designed to meet several needs.
1/ Make the rod removable to make it easier to transport your arcade stick.
2/ Adjust the height of the rod with washers.
To remove the upper part of the rod, simply unscrew it.
The Seimitsu LS-32 NT 'Shaft QR' is the solution to this problem.
This new removable stem for LS-32 joystick has been designed to meet several needs.
1/ Make the rod removable to make it easier to transport your arcade stick.
2/ Adjust the height of the rod with washers.
To remove the upper part of the rod, simply unscrew it.
1.49 €
20% VAT incl.
20% VAT incl.
Original spring for Seimitsu LS-33 joystick.
69.50 €
20% VAT incl.
20% VAT incl.
The Seimitsu LSX-NOBI-01-PRO is a high quality arcade joystick, made in Japan by Seimitsu.
This joystick has specifications made under the supervision of professional gamer Mr. Nobi, who is a former EVO winner and a highly respected Tekken player.
This joystick has specifications made under the supervision of professional gamer Mr. Nobi, who is a former EVO winner and a highly respected Tekken player.
69.50 €
20% VAT incl.
20% VAT incl.
The Seimitsu LSX-NOBI-01-STD is a high quality arcade joystick, made in Japan by Seimitsu.
This joystick has specifications which are actually used under the supervision of professional gaming player Mr. Nobi, who is a former EVO winner and a highly respected Tekken player.
This joystick has specifications which are actually used under the supervision of professional gaming player Mr. Nobi, who is a former EVO winner and a highly respected Tekken player.
3.95 €
20% VAT incl.
20% VAT incl.
Flat mounting plate for Seimitsu joystick LS-32 or LS-40 .
3.95 €
20% VAT incl.
20% VAT incl.
Seimitsu MS P-40 mounting plates are particularly intended for thick panels, such as wooden panels.
They attach to the underside.
14.95 €
20% VAT incl.
20% VAT incl.
Does the handle of your NOBI Seimitsu protrude from your backpack when moving?
The Seimitsu NT 'Shaft QR' is the solution to this problem.
This new removable stem for NOBI joystick has been designed to meet several needs.
1/ Make the rod removable to make it easier to transport your arcade stick.
2/ Adjust the height of the rod with washers.
To remove the upper part of the rod, simply unscrew it.
The Seimitsu NT 'Shaft QR' is the solution to this problem.
This new removable stem for NOBI joystick has been designed to meet several needs.
1/ Make the rod removable to make it easier to transport your arcade stick.
2/ Adjust the height of the rod with washers.
To remove the upper part of the rod, simply unscrew it.
2.85 €
20% VAT incl.
20% VAT incl.
Seimitsu PS-14-D (24mm) black snap button panel metal
2.85 €
20% VAT incl.
20% VAT incl.
Seimitsu PS-14-D (24mm) blue snap button panel metal
2.85 €
20% VAT incl.
20% VAT incl.
Seimitsu PS-14-D (24mm) blue and black snap button panel metal