New Products

Seimitsu LK-33-A 16mm lock delivered with a key
The screwable part is 13mm.
The lock is installed in a 19mm diameter hole.

USB interface to connect easily one arcade joystick and buttons to your PC or Playstation 3.
Ideal to make a mamecab.
Runs under windows without drivers.

This kit, made of Sanwa joysticks and chrome plated buttons, contains all the elements you need for a two-player setup under Raspberry. You can choose the length of the rod of the joysticks according to your type of panel, wood or metal.

This kit, consisting of Sanwa joysticks and standard arcade buttons, contains all the elements you need for a two-player configuration under Raspberry. You can choose the length of the rod of the joysticks according to your type of panel, wood or metal.

The Joystick Seimitsu LS-32-SC are among the best arcade joystick.
There are produced in Japan and is especially suitable for shooters.

Pi2SCART is a PCB that gives you 15Khz RGB via SCART interface.
PI2SCART will be plugged on GPIO interface. Sound will be provided via cable from Raspberry Pi to PI2SCART.
PI2SCART needs no extra power supply

Pin female to CPS2 / CPS3 connector.

CPS2 / CPS3 34-pin female connector (17 * 2).
This connector requires female pins not included.

The range of handles Kori (Japanese ice) adapts perfectly to OBSC Sanwa buttons, Seimitsu K and KN.
The handles are fixed on Sanwa joysticks JLF-TP, the Seimitsu LS32 / LS55, on Zippy and HORI Hayabusa.

The range of handles Kori (Japanese ice) adapts perfectly to OBSC Sanwa buttons, Seimitsu K and KN.
The handles are fixed on Sanwa joysticks JLF-TP, the Seimitsu LS32 / LS55, on Zippy and HORI Hayabusa.

The range of handles Kori (Japanese ice) adapts perfectly to OBSC Sanwa buttons, Seimitsu K and KN.
The handles are fixed on Sanwa joysticks JLF-TP, the Seimitsu LS32 / LS55, on Zippy and HORI Hayabusa.

Pink aluminum ball top joystick arcade.
Fits perfectly on the joysticks SANWA, Seimitsu or ZIPPY.

Black aluminum ball top joystick arcade.
Fits perfectly on the joysticks SANWA, Seimitsu or ZIPPY.

Green aluminum ball top joystick arcade.
Fits perfectly on the joysticks SANWA, Seimitsu or ZIPPY.

Red aluminum ball top joystick arcade.
Fits perfectly on the joysticks SANWA, Seimitsu or ZIPPY.

Light blue aluminum ball top joystick arcade.
Fits perfectly on the joysticks SANWA, Seimitsu or ZIPPY.

The Crown CWL-309MJ-KMS-ST35 joysticks on the South Korean company SAMDUCKSA are arcade Professional quality joysticks.
They are used by professional players in the tournament (including TEKKEN).
The 309MJ versions use a system voltage rubber to provide a unique gameplay.
This allows such a rapid return to neutral, which is essential for fight games.

This kit, consisting of a Sanwa JLF-TP-8YT joystick and standard arcade buttons, contains all the elements you need toone player configuration under Raspberry.
You can choose the length of the rod of the joysticks according to your type of panel, wood or metal.

The long hollow shaft for Seymitsu LS-32 joysticks can be used as a replacement for the original shaft.
It is mainly intended for the installation of the Seimitsu LS-32 joysticks on a wood panel.
It also has the characteristic of being hollow which makes it possible to pass light to a certain extent.

The Seimitsu LS-32 hollow standard shaft for joysticks can be used as a replacement for the original shaft. It also has the characteristic of being hollow which makes it possible to pass light to a certain extent.