New Products

ST-45 diaphragm model increases stiffness of your Crown CWL-309 joystick
This results in a faster return to the central position of the stick.

ST-35 diaphragm model increases stiffness of your Crown CWL-309 joystick
This results in a faster return to the central position of the joystick rod.

The ST-25 silicone membrane is the original part of your Crown CWL-309 joysticks.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.

Black metal door with mechanical coin holder.
This door is installed on a wooden support with four screws included.

This CGA video converter (15KHz) to HDMI converter is the ideal for displaying the image from card arcade games on a screen with HDMI.

With this HDMI cable male / male with standard 1.4, you can connect your raspberry (or other device) to a screen to the HDMI standard.

This octagonal guide made by SmallCab is the essential complement to your SANWA JLF-TP joystick.
It facilitates the placement of directions and optimizes the distance the stick moves from one direction to another.
Thanks to this guide, you will easily make all the combos!

Black metal double door for arcade terminal equipped with a coin holder.
The cash box is locked in a metal box.

Arcade button equipped with plated or miniature slats.
The traditional micro-switch system that has been replaced by slats that slide to make contact. This system is quieter than buttons equipped with a micro-switch.

Arcade button equipped with plated or miniature slats.
The traditional micro-switch system that has been replaced by slats that slide to make contact. This system is quieter than buttons equipped with a micro-switch.

To improve the gaming experience, it is necessary to add inertia to your Spintrak spinner.
This is what this mass developer is proposing for Spinner Spintrak.

Add a fly-weight to your SpinTrak Spinner to provide inertia giving longer spin-times.
This flywheel is designed with the mass concentrated at the larger radius to improve the inertia.
NOTE: A hex/allen wrench is needed to tighten the set screw on the flyweight but is not included. The wrench that's included with a SpinTrak Spinner will fit.

Sanwa OBSJ-24 Gun Metal snap-in pushbutton for metal control panel.

Sanwa OBSJ-30 Gun Metal snap-in pushbutton for metal control panel.

Sanwa Gun Metal Ball Top.
This handle fits snugly on Seimitsu joysticks or Zippy.

SEGA 5375 for Japanese Candy Cab. The barrel is delivered without a cam (movable part of the lock).

SEGA 5375 key for Japanese Candy cab with 5375 lock.

The JST-XH cable can be used on SANWA joysticks in the JLF-TP range or on Seimitsu LS- (XX) -01 instead of the traditional 5-pin cable.
The other end of the cable can then be connected to the controller board in many Arcade stick models.

This dustwasher can be installed exclusively on IL brand battop joysticks or on magnetic joysticks.
For any other use, check the dimensions of the product.

This dustwasher can be installed exclusively on IL brand battop joysticks or on magnetic joysticks.
For any other use, check the dimensions of the product.