New Products
The Samducksa SDB-202C MX 24mm button completes the range of SDB-202C MX 30mm.
10.90€
Handle for Midway type bollard.
This handle is partially hollow which facilitates the grip.
This is the model that fitted the Killer Instinct terminals.
This handle is partially hollow which facilitates the grip.
This is the model that fitted the Killer Instinct terminals.
This converter is compatible with your PS5 / Wii / Wii-U wireless controller, Wiimote, Taiko Drum, NS Pro controller, Joy-Con, PS4 wireless controller and Xbox One controller (bluetooth model only). It also allows you to customize the button layout and add a turbo button to original and third-party controllers.
With the Super Converter Brook, you can use the existing controllers as mentioned above to play on your NS / PS4 console and on PC!
With the Super Converter Brook, you can use the existing controllers as mentioned above to play on your NS / PS4 console and on PC!
The surface of this ball top is treated with nylon material which has a felt-like texture.
This results in a very particular touch comparable to that of velvet.
This results in a very particular touch comparable to that of velvet.
Set of eight nylon washers to protect the feet of your Flipper or Pincab
These washers are installed between the screws and the feet of your Flipper or Pincab.
These washers are installed between the screws and the feet of your Flipper or Pincab.
Set of eight nylon washers to protect the feet of your Flipper or Pincab
These washers are installed between the screws and the feet of your Flipper or Pincab.
These washers are installed between the screws and the feet of your Flipper or Pincab.
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
2 reviews
Five Point Joystick to Hit Conversion Cable for Fighting Board PCB Cable.
Converts the five-point signal to four independent connectors (2.8mm lug) and four common ground (2.8mm lug).
Converts the five-point signal to four independent connectors (2.8mm lug) and four common ground (2.8mm lug).
The UFB-UP5 PCB is an add-on board compatible with the boards:
PCB Universal Fighting board (with or without connectors).
PCB Fighting board PS4 + audio.
PCB Fighting board PS3/PS4 Plus.
PCB Fighting board PS3/PS4.
It adds compatibility with the PS5 console (only for fighting games).
To make it work, you will need to update your Ultimate Fighting board firmware (UFB Firmware Update).
PCB Universal Fighting board (with or without connectors).
PCB Fighting board PS4 + audio.
PCB Fighting board PS3/PS4 Plus.
PCB Fighting board PS3/PS4.
It adds compatibility with the PS5 console (only for fighting games).
To make it work, you will need to update your Ultimate Fighting board firmware (UFB Firmware Update).
Sanwa OBSF-CR-24 black snap-in pushbutton for metal control panel.
This "plunger" is the moving part (push) buttons SANWA OBSF-24.
It is available in many colors to create dozens of combinations with solid or transparent edges for different ranges of Sanwa buttons.
It is available in many colors to create dozens of combinations with solid or transparent edges for different ranges of Sanwa buttons.
Replacement battop for Crown / Samducksa Crazy Dongpal.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Replacement battop for Crown / Samducksa Crazy Dongpal.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
Please note, the battop is molded onto the shaft and it is not possible to replace it. The product is delivered without E-clip and without dust washer which you will need to collect from your existing lever to install.
The ST-30 silicone membrane is the original part of your Crown CWL-309 joysticks.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.
The ST-20 silicone membrane is the original part of your Crown CWL-309 joysticks.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.
29.90€
This vibrating motor (shaker) will allow you to make your Pincab or mini Pincab vibrate according to the actions triggered on the tables managing this toy.
It is the essential element for your Pincab to make it vibrate like a real Flipper.
It is the essential element for your Pincab to make it vibrate like a real Flipper.