New Products

The GTN-B insert is an insert for GT-8X guide.
Developed by Sanwa, it optimizes the JLF series joysticks, with more precise guides in the directions.

The Sanwa GTN-B insert is a guide with a unique shape, rounded above and below, with marked angles on the right and left.
To use it, you must have the Sanwa GT-8X support.

The GTN-R insert is an insert for GT-8X guide.
Developed by Sanwa, it optimizes the JLF series joysticks, with more precise guides in the directions.

The Sanwa GTN-R insert is a square guide with rounded corners.
To use it, you must have the Sanwa GT-8X support.

This 4/8 way guide (GT-8X) is an original part for SANWA joystick from the JLF-TP range.
This guide is essential for the installation of the GTN-VI, GTN-Y, GTN-R, GTN-B guides.
The central part is removable and has two positions (4 or 8 ways).
By default, the guide is delivered in the 8-way position.

The slingshot is the component that pushes the ball back when you come into contact with the rubber band of the island placed above the flippers.
It is an element that contributes to the sensations returned by your Pincab to make it as close as possible.
The Knocker is controlled with a Freescale KLZ25 PCB and the Pinscape Config Tool software.

The JLF-SP-VI spring is taken from the official Sanwa kit to optimize the JLF series joysticks.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).

The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the violet spring, the tension is 1 times that of the original spring, when the handle is in position 1.
And, the tension is 1.5 times that of the original spring when the handle is in position 2.

The JLF-SP-Y spring is taken from the official Sanwa kit to optimize the JLF series joysticks.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).

The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the yellow spring, the tension is 1.3 times that of the original spring, when the handle is in position 1.
And, the tension is 2 times that of the original spring when the handle is in position 2.

The JLF-SP-R spring is taken from the official Sanwa kit to optimize the JLF series joysticks.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).

The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the red spring, the tension is 2 times that of the original spring, when the handle is in position 1.
And, the tension is 2 times that of the original spring when the handle is in position 2.

The JLF-SP-B spring is taken from the official Sanwa kit to optimize the JLF series joysticks.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).

The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the blue spring, the tension is 1.5 times that of the original spring, when the handle is in position 1.
And, the tension is 1.5 times that of the original spring when the handle is in position 2.

The JLF P-R is an actuator produced by Sanwa to optimize its JLF series joysticks.
This actuator offers a shorter engagement distance.

The JLF P-R is an actuator produced by Sanwa to optimize its JLF series joysticks.
This actuator offers a shorter engagement distance.

The surface of this ball top is treated with nylon material which has a felt-like texture.

This results in a very particular touch comparable to that of velvet.

The surface of this ball top is treated with nylon material which has a felt-like texture.

This results in a very particular touch comparable to that of velvet.

The Wingman XE 2 supports PS3 / PS4 / PS5 / Xbox 360 / Xbox One / Xbox Elite / Xbox Elite Series 2 controllers as well as arcade sticks to operate them on PS3/PS4/Switch or PC.
Version 2 brings:
1. Support Xbox series x|s, Xbox One and Xbox Elite 2 controllers in WIRELESS.
2. 5-level Turbo settings: Includes 5, 10, 15, 20 and 25 clicks/second.
3. The Wingman XE2 is now compatible with the Nintendo Switch

Mean Well brand 5V and 12V power supply for arcade machines.
The Mean Well brand is renowned for its quality power supplies.
The power supply has an EMI filter at the input.
This power supply is used with all small PCBs in JAMMA format that do not require -5V or a large amperage on +5V (Ex: Slot MVS, PCB Xin1)

The Omron V-16539-3A5 micro switch is a joystick micro switch.
It is fitted as standard to the Seimitsu LS-32 and LS-40 joysticks.
Attention, It does not equip the LS-32-01 and LS-40-01 models which have micro-switches soldered on a PCB.

Power cable for PC.
Ideal for powering a screen or a PC placed inside a terminal or a Pincab.
Due to its small size, it avoids winding unnecessary lengths of cable inside your machine.

Standard size (22-5/16") lockdown bar for WPC Williams/Bally machines.

Black comb for domino with terminal block makes it easy to connect the terminals together.
This comb is used to connect twelve terminals together.
Compatible with the terminal blocks sold on the store.

Black comb for domino with terminal block makes it easy to connect the terminals together.
This comb is used to connect eight terminals together.
Compatible with the terminal blocks sold on the store.

Black comb for domino with terminal block makes it easy to connect the terminals together.
This comb is used to connect six terminals together.
Compatible with the terminal blocks sold on the store.