New Products
Jack 5.5mm / 2.1mm power splitter cable.
This cable can power up to three components with a 5.5mm / 2.1mm jack connector (audio amplifier, LED strip, illuminated buttons, etc.).
This cable can power up to three components with a 5.5mm / 2.1mm jack connector (audio amplifier, LED strip, illuminated buttons, etc.).
The Samducksa SDB-202M MX button is very similar to the SDB-201 model.
It has the particularity of being equipped with a Cherry MX Silver micro switch which is triggered from 1.2mm on the 3.4mm of travel of the button.
It has the particularity of being equipped with a Cherry MX Silver micro switch which is triggered from 1.2mm on the 3.4mm of travel of the button.
The Samducksa SDB-202M MX 24mm button completes the range of SDB-202M 30mm.
50W vibrating speaker (exciters) in 8ohms intended to equip your Pincab with an SSF (Surround Sound Feedback) installation.
The SSF will complement the different toys of your Pincab by giving it a new dimension.
The SSF will complement the different toys of your Pincab by giving it a new dimension.
Round handle with red marble effect by Seimitsu.
This uniquely designed handle is suitable for all Seimitsu or Sanwa brand joysticks.
It also fits on our standard joysticks.
This uniquely designed handle is suitable for all Seimitsu or Sanwa brand joysticks.
It also fits on our standard joysticks.
Round handle with red marble effect by Seimitsu.
This uniquely designed handle is suitable for all Seimitsu or Sanwa brand joysticks.
It also fits on our standard joysticks.
This uniquely designed handle is suitable for all Seimitsu or Sanwa brand joysticks.
It also fits on our standard joysticks.
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Samducksa bat top compatible with all joysticks.
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).
17.90€
Korean joysticks can be tricky to wire - they require a 5-pin to 8-pin conversion harness, which can be complicated and confusing for beginners.
This is where this PCB board comes in, it has a 5-pin connector identical to the Sanwa JLF.
This is where this PCB board comes in, it has a 5-pin connector identical to the Sanwa JLF.
15.90€
With the Bit bang gaming mounting PCB you will have the possibility to customize your JLF joystick with microswitches equipped with 6.3mm lugs without soldering.
The Shuriken JLF PCB is equipped with a 5 pin connector, just like the original Sanwa PCB.
The Shuriken JLF PCB is equipped with a 5 pin connector, just like the original Sanwa PCB.
50W 8ohms vibrating loudspeaker (exciters) intended to equip your Pincab with an SSF (Surround Sound Feedback) installation.
The SSF will complete the various toys of your Pincab by giving it a new dimension.
The SSF will complete the various toys of your Pincab by giving it a new dimension.
50W 4ohms vibrating loudspeaker (exciters) intended to equip your Pincab with an SSF (Surround Sound Feedback) installation.
The SSF will complete the various toys of your Pincab by giving it a new dimension.
The SSF will complete the various toys of your Pincab by giving it a new dimension.
Large 'Widebody' (63cm) locking bar for Pincab.
This lockbar is particularly suitable for Pincabs equipped with a 43-inch screen.
The bar is delivered complete with its fixing system.
The button and its fixing system are included, all that is missing is the lamella switch for its operation.
This lockbar is particularly suitable for Pincabs equipped with a 43-inch screen.
The bar is delivered complete with its fixing system.
The button and its fixing system are included, all that is missing is the lamella switch for its operation.
Large 'Widebody' (56cm) locking bar for Pincab.
This lockbar is particularly suitable for Pincabs equipped with a 40-inch screen.
The bar is delivered complete with its fixing system.
The button and its fixing system are included, all that is missing is the lamella switch for its operation.
This lockbar is particularly suitable for Pincabs equipped with a 40-inch screen.
The bar is delivered complete with its fixing system.
The button and its fixing system are included, all that is missing is the lamella switch for its operation.
Standard size lockdown bar (56cm) for Pincab.
This lockbar is particularly suitable for Pincab equipped with a 40-inch screen.
The bar is delivered complete with its fixing system.
This lockbar is particularly suitable for Pincab equipped with a 40-inch screen.
The bar is delivered complete with its fixing system.
Ball lance with transparent light green handle for pinball or pincab.
This screw-on button (wooden or metal panel) shines with a thousand lights when it is lit and its tone-on-tone translucent surround gives it a sober and elegant appearance. It is supplied with an LED and a microswitch (optional).
This screw-on button (wooden or metal panel) shines with a thousand lights when it is lit and its tone-on-tone translucent surround gives it a sober and elegant appearance. It is supplied with an LED and a microswitch (optional).