New Products

The surface of this ball top is treated with nylon material which has a felt-like texture.

This results in a very particular touch comparable to that of velvet.

NB: Product sold with defective appearance (see photo).
The withdrawal does not apply to this product.
Black metal double door for arcade terminal equipped with a coin holder.
The cash box is locked in a metal box.

Set of eight nylon washers to protect the feet of your Flipper or Pincab
These washers are installed between the screws and the feet of your Flipper or Pincab.

Set of eight nylon washers to protect the feet of your Flipper or Pincab
These washers are installed between the screws and the feet of your Flipper or Pincab.

Samducksa bat top compatible with all joysticks.

Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).

Samducksa bat top compatible with all joysticks.

Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).

Samducksa bat top compatible with all joysticks.

Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).

Samducksa bat top compatible with all joysticks.

Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).

Samducksa bat top compatible with all joysticks.

Fits as standard on Samducksa SDL-301-DX joysticks, CWL-303MJ-DX-ST35 Crazy Dongpal or any other Samducksa model equipped with a JLF conversion shaft.
Mounts on all joysticks equipped with a 6mm thread (Sanwa / Seimitsu).

Complete wiring Hit box buttons for PCB Fighting Board.
Connection to the 2x10 pin support of brook cards (J4 or J9).
Standard connector for buttons fitted with 2.8mm lugs.

The UFB-UP5 PCB is an additional board to the Universal Fighting boards (with or without connectors).
With it you will add compatibility with the PS5 console.
To make it work, you will need to update your Ultimate Fighting board firmware (UFB Firmware Update).

Sanwa OBSF-CR-24 black snap-in pushbutton for metal control panel.

This "plunger" is the moving part (push) buttons SANWA OBSF-24.
It is available in many colors to create dozens of combinations with solid or transparent edges for different ranges of Sanwa buttons.

The Pi2JAMMA is a PCB that connects your RaspBerry to a JAMMA connector.
It allows a 15Khz audio / video output on a JAMMA connector.
The joysticks / buttons are also managed on the JAMMA port.
To do this, the Pi2JAMMA connects very simply to the GPIO interface of RaspBerry.
The sound is recovered from the headphone jack via an audio cable.
The Pi2JAMMA does not need extra power to operate.

Transparent plexiglass protection 2 mm thick.
This protection will allow you to replace the original one that is included with the original stick.

Replacement rod for Crown / Samducksa Crazy Dongpal.

Replacement rod for Crown / Samducksa Crazy Dongpal.

The ST-30 silicone membrane is the original part of your Crown CWL-309 joysticks.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.

The ST-20 silicone membrane is the original part of your Crown CWL-309 joysticks.
It allows to give a better reactivity / repositioning to a joystick used intensely for several months.

This vibrating motor (shaker) will allow you to make your Pincab or mini Pincab vibrate according to the actions triggered on the tables managing this toy.
It is the essential element for your Pincab to make it vibrate like a real Flipper.