New Products
Official Raspberry Pi Foundation case
Optimized ventilation: thanks to the integrated variable speed fan, powered and controlled from a dedicated connector, allows the Pi 5 to stay cool even when subjected to intensive workloads.
Optimized ventilation: thanks to the integrated variable speed fan, powered and controlled from a dedicated connector, allows the Pi 5 to stay cool even when subjected to intensive workloads.
Used product used as a demonstration at a trade show for 3 days.
Product in perfect working order.
The Hit Box is an optimized controller.
It offers you to replace the traditional joystick with buttons.
You will be able to move directly with your fingers: left, down, right and up (jump) with either thumb.
Product in perfect working order.
The Hit Box is an optimized controller.
It offers you to replace the traditional joystick with buttons.
You will be able to move directly with your fingers: left, down, right and up (jump) with either thumb.
Stern type clear light green ball shooter for pinball or virtual pinball.
Stern type clear red ball shooter for pinball or virtual pinball.
Stern type clear blue ball shooter for pinball or virtual pinball.
Stern type clear ball shooter for pinball or virtual pinball.
Complete set of four Williams / Bally type pinball / pincab feet.
The pack contains 4 feet, 4 adjustable jacks, 4 foot cages and 8 foot screws.
Foot for Pincab or Williams type pinball machine.
Set of 4 new chrome feet.
The pack contains 4 feet, 4 adjustable jacks, 4 foot cages and 8 foot screws.
Foot for Pincab or Williams type pinball machine.
Set of 4 new chrome feet.
Foot for Pincab or pinball type Williams.
Set of 4 feet new.
Set of 4 feet new.
Speaker plate used on Stern Premium and LE machines.
Sold individually and not in batches.
If you need two speaker plates, you must take two units.
Sold individually and not in batches.
If you need two speaker plates, you must take two units.
Active cooling solution for users who want to use their Raspberry Pi 5, without a case.
Combines a large metal heatsink with a variable speed fan, powered and controlled via the fan connector.
Optimal heat dissipation helps reduce the risk of your Raspberry Pi 5 overheating, extending its lifespan and ensuring reliable performance.
Simple installation: attaches to the Raspberry Pi 5 via the fan/sink connectors.
Combines a large metal heatsink with a variable speed fan, powered and controlled via the fan connector.
Optimal heat dissipation helps reduce the risk of your Raspberry Pi 5 overheating, extending its lifespan and ensuring reliable performance.
Simple installation: attaches to the Raspberry Pi 5 via the fan/sink connectors.
Power supply for devices using a USB-C type connector.
This official power supply is particularly suitable for the RaspBerry Pi 5 and Pi 4 which requires a power supply with good amperage.
This official power supply is particularly suitable for the RaspBerry Pi 5 and Pi 4 which requires a power supply with good amperage.
99.90€
Raspberry Pi 5 Model B 8GB.
Up to 3 times more performance than Raspberry Pi 4 with the BCM2712 chip with a new 2.4 GHz quad-core Cortex-A76 (ARM v8 - 64-bit) processor and a VideoCore VII GPU.
Up to 3 times more performance than Raspberry Pi 4 with the BCM2712 chip with a new 2.4 GHz quad-core Cortex-A76 (ARM v8 - 64-bit) processor and a VideoCore VII GPU.
75.90€
Raspberry Pi 5 Model B 4GB.
Up to 3 times more performance than Raspberry Pi 4 with the BCM2712 chip with a new 2.4 GHz quad-core Cortex-A76 (ARM v8 - 64-bit) processor and a VideoCore VII GPU.
Up to 3 times more performance than Raspberry Pi 4 with the BCM2712 chip with a new 2.4 GHz quad-core Cortex-A76 (ARM v8 - 64-bit) processor and a VideoCore VII GPU.
Seimitsu flat All-in-One mounting plate.
This official mounting plate is compatible with all Seimitsu joysticks.
You find all the holes for existing Seimitsu plates: SE, MS, VF and Vewlix.
This official mounting plate is compatible with all Seimitsu joysticks.
You find all the holes for existing Seimitsu plates: SE, MS, VF and Vewlix.
This voltage regulator allows you to control the speed of a DC motor (12V).
This regulator benefits from protection against reverse polarity and protection against high currents (fuse).
Its remote potentiometer will allow you to install it accessible from the outside.
It is the essential complement to your Shaker.
This regulator benefits from protection against reverse polarity and protection against high currents (fuse).
Its remote potentiometer will allow you to install it accessible from the outside.
It is the essential complement to your Shaker.
With its Alutimo buttons, Seimitsu offers us a shim system (0.2mm or 1mm) which will allow you to adapt the travel height of the button with the activation of the micro switch.
By default, Alutimo buttons are equipped with Cherry MX Silver microswitches with a travel of 1.6mm and a shim of 1mm.
By default, Alutimo buttons are equipped with Cherry MX Silver microswitches with a travel of 1.6mm and a shim of 1mm.
With its Alutimo buttons, Seimitsu offers us a shim system (0.2mm or 1mm) which will allow you to adapt the travel height of the button with the activation of the micro switch.
By default, Alutimo buttons are equipped with Cherry MX Silver microswitches with a travel of 1.6mm and a shim of 1mm.
By default, Alutimo buttons are equipped with Cherry MX Silver microswitches with a travel of 1.6mm and a shim of 1mm.
This little tool helps you remove the Cherry MX switch from the Alutimo buttons.
To use it, simply remove the plunger and place the tool under the button.
A simple press on the central part and the switch will come out by itself.
Be careful not to lose the two fixing cylinders, you will need them to reattach the micro switch.
We recommend this tool which simplifies the disassembly of the microswitches of the Alutimo buttons.
To use it, simply remove the plunger and place the tool under the button.
A simple press on the central part and the switch will come out by itself.
Be careful not to lose the two fixing cylinders, you will need them to reattach the micro switch.
We recommend this tool which simplifies the disassembly of the microswitches of the Alutimo buttons.
56.5 cm wide (22-1/4") black locking bar with Dual Latch attachment system and location for a fire button for Stern pinball machines.
This lock bar does not have mounting holes for a metal plate around the action/fire button.
The space in the lockbar is 56.1 cm (maximum box size).
Pay attention to the dimensions which are different from that of a Williams lockbar.
This lock bar does not have mounting holes for a metal plate around the action/fire button.
The space in the lockbar is 56.1 cm (maximum box size).
Pay attention to the dimensions which are different from that of a Williams lockbar.