Sanwa Denshi Co.
2.90 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) clear green is the ideal companion for your SANWA joystick accompanied with OBSC clear buttons.
2.90 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) clear red is the ideal companion for your SANWA joystick accompanied with OBSC clear buttons.
2.90 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) clear smoke is the ideal companion for your SANWA joystick accompanied with OBSC clear buttons.
2.90 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) clear white is the ideal companion for your SANWA joystick accompanied with OBSC clear buttons.
2.90 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) clear yellow is the ideal companion for your SANWA joystick accompanied with OBSC clear buttons.
5.95 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) gold aluminum is the ideal companion for your SANWA joystick with aluminum balltop.
2.90 €
20% VAT incl.
20% VAT incl.
This rod cover kit (JLF-CD) purple is the ideal companion for your SANWA joystick accompanied with OBSC clear buttons.
1 reviews
2.50 €
20% VAT incl.
20% VAT incl.
This Joystick shaft cover kit (JLF-CD) is the perfect companion for your Sanwa joystick.
0.50 €
20% VAT incl.
20% VAT incl.
Original circlip for Sanwa JLF-TP joystick.
0.90 €
20% VAT incl.
20% VAT incl.
The Sanwa JLF-MW washer is the original part that is positioned above the Sanwa JLF-TP joystick base.
Because of its small size, this piece can be lost during a customization.
Because of its small size, this piece can be lost during a customization.
4.95 €
20% VAT incl.
20% VAT incl.
S mounting plate for Sanwa joystick JLF-TP.
0.95 €
20% VAT incl.
20% VAT incl.
The Sanwa JLF-P-4 is the original pivot of the Sanwa JLF-TP joystick.
The pivot allows the free movement of the joystick shaft. This part is based on the JL-P-2 base which is lubricated with grease to prevent premature wear.
The pivot allows the free movement of the joystick shaft. This part is based on the JL-P-2 base which is lubricated with grease to prevent premature wear.
1.10 €
20% VAT incl.
20% VAT incl.
Original Actuator for Sanwa JLF-TP joystick.
1.20 €
20% VAT incl.
20% VAT incl.
The Sanwa JLF-P-6 holder holds the tension spring in place during joystick movements.
This is the original part of the Sanwa joysticks from the JLF series.
This is the original part of the Sanwa joysticks from the JLF series.
2.10 €
20% VAT incl.
20% VAT incl.
The JLF P-R is an actuator produced by Sanwa to optimize its JLF series joysticks.
This actuator offers a shorter engagement distance.
This actuator offers a shorter engagement distance.
2.10 €
20% VAT incl.
20% VAT incl.
The JLF P-R is an actuator produced by Sanwa to optimize its JLF series joysticks.
This actuator offers a shorter engagement distance.
This actuator offers a shorter engagement distance.
2.10 €
20% VAT incl.
20% VAT incl.
The JLF P-W is an actuator produced by Sanwa to optimize its JLF series joysticks.
This actuator offers a shorter engagement distance.
This actuator offers a shorter engagement distance.
1.20 €
20% VAT incl.
20% VAT incl.
Original spring for Sanwa JLF-TP joystick.
2.50 €
20% VAT incl.
20% VAT incl.
The JLF-SP-B spring is taken from the official Sanwa kit to optimize the JLF series joysticks.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).
The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the blue spring, the tension is 1.5 times that of the original spring, when the handle is in position 1.
And, the tension is 1.5 times that of the original spring when the handle is in position 2.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).
The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the blue spring, the tension is 1.5 times that of the original spring, when the handle is in position 1.
And, the tension is 1.5 times that of the original spring when the handle is in position 2.
2.50 €
20% VAT incl.
20% VAT incl.
The JLF-SP-R spring is taken from the official Sanwa kit to optimize the JLF series joysticks.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).
The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the red spring, the tension is 2 times that of the original spring, when the handle is in position 1.
And, the tension is 2 times that of the original spring when the handle is in position 2.
It allows you to adjust the stiffness of the rod, both at the start and at the end of the race (see detail in the diagram).
The table shows the forces exerted by the different springs at two times of the stroke of the rod.
For the red spring, the tension is 2 times that of the original spring, when the handle is in position 1.
And, the tension is 2 times that of the original spring when the handle is in position 2.